Author Guide

PLOS Currents: Evidence on Genomic Tests takes a broad of the definition of genomic testing. Suitable topics include many proteomic testing schemes and protein-based tests (although tests for single biomarkers or antigens are generally not suitable), and applications that are termed “genetic tests”. Authors may wish to consult the definition of genetic testing provided on page 17 of the 2008 SACGHS report U.S. System of Oversight of Genetic Testing: A Response to the Charge of the Secretary of Health and Human Services. One potential source of topics is the Genomic Applications for Practice and Prevention Knowledge Base (GAPPKB).

General Guidelines

  • Submission of a manuscript to PLOS Currents: Evidence on Genomic Tests implies that all listed authors contributed substantially to the work, and that the work is an original contribution.
  • In cases when it is not immediately clear whether a contributor should be an author or simply acknowledged, please follow the policies used by the PLOS Journals.
  • If a manuscript constitutes primary publication of results from a study involving human subjects, authors must affirm that it was done in accordance with the World Medical Association Declaration of Helsinki.
  • All submissions must meet the guidelines set forth in the PLOS-wide data policy for data availability standards. All data underlying the findings described in the manuscript must be made fully available without restriction (with some exceptions).

Submission Guidelines and Editorial Policies

Author Affiliations

Please provide full names and affiliations (Department, Institution, City, State, Country) for all authors as you would like them to appear on the article. You can update the institution by filling out the “Affiliation” field in each author’s profile.


Please structure your Abstract with the following heading or similar: Introduction, Methods, Results, Discussion.

Funding Statement

Please provide a Funding Statement. Describe the sources of funding that have supported the work. Please include relevant grant numbers and the URL of any funder’s website. Also, describe the role of any sponsors or funders. If they had no role, include this sentence at the end of your statement: “The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.”

If you did not receive any funding for this work, please state “The author(s) received no specific funding for this work.”

Competing Interest Statement

Please declare any competing interests as described in the “PLOS Policy on Declaration and Evaluation of Competing Interests.” You are responsible for recognizing and disclosing on behalf of all authors any competing interest that could be perceived to bias their work, acknowledging all financial support and any other relevant financial or competing interests.

If no competing interests exist please include the following text in your article “The authors have declared that no competing interests exist.”

If you have competing interests to declare, please include the following statement: “I have read the journal’s policy and have the following conflicts…”

  • PLOS defines a competing interest (COI) as anything that interferes with, or could be perceived as interfering with, the complete and objective presentation, peer review, editorial decision-making, or publication of a manuscript. A COI can be financial, professional, or personal, and can arise in relation to an organization or an individual.  

    *Please note that if a submitting author is serving as a member of the Editorial Board for a PLOS Currents journal, we ask that you declare this in the Competing Interests statement

Ethics Statement

For studies involving human or animal research, authors should follow the policies established for the PLOS Journals (see for example the policies for PLOS ONE Animal Research or Human Subjects Research) and provide an ethics statement in their Materials and Methods section.


Please incorporate your references using the reference tool. Please ensure that ALL References are inserted in the article in ascending numerical order. Use the “Insert References” tool to add any citations to your manuscript. For further information, please see our guidelines for references:

Data Reporting

Please adhere to the Open Data policy by providing a Data Availability Statement. Please know that all PLOS journals require the minimal dataset underlying the findings in the manuscript (i.e. the values behind statistics, graphs, figures, and tables) to be freely available to other researchers. Data may be placed in a public repository such as Figshare ( or Dryad (, Supporting Information files, or in the manuscript itself. This policy applies to all data except where public deposition would be in violation of legal or ethical restrictions or the data is owned by a third party.

Please let us know where your data may be located and provide DOIs or accession numbers if necessary. If ethical or legal restrictions do exist, please state who is imposing these restrictions, the nature of the restrictions (i.e. why the restrictions have been imposed), and provide contact information to which requests for the data may be sent. Please also provide contact information to where requests may be sent if data is owned by a third party.

For further information, please visit our site:

Note: We recommend using Google Chrome or Mozilla Firefox when submitting to PLOS Currents.

Instructions for Creating a PLOS Currents Author Account

All authors and co-authors will need a PLOS Currents account in order compose and submit a manuscript to PLOS Currents. A new account can be created by clicking the ‘Register’ link on the PLOS Currents: EoGT log-in page, which can be found via the ‘log in’ link in the upper right-hand corner of the PLOS Currents homepage.

Submitting a username and email address will generate an email message asking you to confirm your account. Completing the confirmation process will generate a second message, which will provide you with the temporary password you will need to log in. This password can be updated as needed on your Profile page.

Once logged in, please update your profile with your full name, and affiliation information. This information will be used in the PLOS Currents articles published under your name, so please ensure that your name and affiliation information appears exactly as it should in the author list of a published article, and in PubMed.

You can access your profile via the Profile section on your ‘Dashboard’ page – your name should be submitted in the ‘Your Profile’ page, while your affiliation should be submitted on the ‘Annotum Profile’ page.

Instructions for Writing and Submitting articles to PLOS Currents

Once you have created an Annotum account and logged in, you will be able to create a new article via the WordPress Dashboard, which is accessible from the top of any PLOS Currents page. Before creating a new submission, please make sure of the following:

A) Please ensure that you are logged in to the correct PLOS Currents section – the name of the section will appear in the Dashboard bar at the top of the page. Unfortunately, we are not able to transfer articles between PLOS Currents sections at the moment.

B) Please ensure that you are creating a new Article, rather than a new ‘Post.’ Posts cannot be published in PLOS Currents, and will need to be re-submitted as articles.

From the Annotum Dashboard page, select the ‘Articles’ button on the left-hand sidebar, followed by the ‘Add New’ button.

Enter the paper’s Title, Abstract, Funding Statement, and Acknowledgments into the appropriate text fields on the submission page, using the editing toolbar to format the text, add images, tables, equations, and lists as needed.

Note: If you are copying a fully formatted document into Annotum, the previous document’s formatting may not display correctly in Annotum. In this case the you can use the ‘Paste as Plain Text’ tool to copy the article into Annotum.

Creating Article Text

A) Note the ,, and

tags found in the ‘Body’ text field – these tags will allow you to correctly format your article for publication.

    • If only one row of toolbar buttons appears above the ‘Body’ field, click the ‘Show/Hide Kitchen Sink’ button to access the second row, which includes the buttons for creating references, tables, and equations.

B) Section headings (Introduction, Methods, Results, etc) should be provided in thefield, while article text should be provided in the

text fields (

= paragraph). Sub-headings should be denoted by using bold text formatting.

C) New sections can be created by pressing Ctrl + Enter on your keyboard:

    • Pressing Ctrl+ Enter while your cursor is in awill create a new section which contains a newfield.
    • Pressing Ctrl+ Enter while your cursor is in thefield will create a new.
    • Pressing Enter while your cursor is in afield will create a new.

Instructions for Figures, Tables, Equations and References:

Adding Co-Authors

Co-authors can be added to an Annotum article at any point in the article-creation process.

In the article editor, find the “Author” and “Co-Authors” meta boxes on the right-hand side of the screen – you may have to scroll down to find them.

A) If your co-authors do not already have PLOS Currents profiles, you can invite them to do so via the ‘invite a new user’ link, found in the ‘Co-Authors’ box on the right-hand sidebar.

B) If your co-authors already have Annotum profiles, enter their names into the search field in the ‘Co-Authors’ box on the right-hand sidebar, select the correct name, and click the ‘Add’ button.

Note – the author order will be denoted by the order in which you invite authors. That is, as the primary author you will appear as the first author (this can be changed), the first co-author added to the article will appear as the second author, the second co-author invited will appear as the third, etc…

To change the primary author for an article, follow these steps:

1) Open the article in the article editor

2) Be sure that the desired primary author is already added as a coauthor. See “Adding and Inviting Coauthors”, earlier in this article, for more details.

3) Find the “Author” meta-box on the right-hand side of the screen. You may have to scroll down the page to find it.

4) Use the dropdown menu to select a new primary author

Providing Author Affiliation Information

In the published article, the author list will appear at the top of the page, and each author’s affiliation information will appear upon mouse-over of their name. Each author will need to submit his/her own affiliation information in Annotum, which can be done via the ‘Annotum Profile’ page.

Submitting Your Article

Once the article is complete, you can submit it for review. The submission process can be initiated via the ‘Submit For Review’ button found in the top right corner of your submission page:

NOTE: Press OK if you receive the pop-up warning regarding XML errors:

XML error

Once submitted, the status box for your submission will read as follows:

As your submission moves through the editorial process, the status box will display the following stages:

  • Waiting for Review – the editors are considering whether to solicit review comments from the experts on our reviewer board.
  • In Review – the editors have sent invitations to external reviewers, who will be given approximately one week to provide their review comments.
  • Approved/Declined/Revised – the editors have reached a decision, and you should have received a formal decision letter

If and when your article is approved for publication by the editors, PLOS Currents staff will give the submission a final quality check to ensure that all required information has been provided, and that the article is formatted correctly. If revisions are requested, the article returns to a draft status for further editing by the author(s).

Annotum Knowledgebase” © 20012 Solvitor LLC, CC-BY-SA